Insert title here
  • 版权：钛锆铪工业网
  • 陕ICP备05006818号-2
  • 地址：陕西省西安市未央路96号 邮编：710016
  • 电话：029-86224484 邮箱：xxstip@c-nin.com
    • 发布时间：2017-02-06   来源：有色金属战略平台  点击量：1582
    文集名称Titanium Science and Technology
    国别美国类别世界钛会论文集
    出版单位PLENUM PRESS
    出版日期1973-07-01载文量200
    简介该文集为第二届世界钛会的会议论文集，会议于1972年5月2—5日在美国Massachusetts，Cambridge，Massachusetts Institute of Technology,Auditorium举行。

    本文集文章列表
    Introductory Remarks............[5-9]
    Keynote Address............[11-20]
    Banquet Address............[21-27]
    Critical Review............[31-43]
    Manufacturing Exercise Involved in the Redesign of the Hawker Siddeley Trident (Tri-Jet) Fuselage............[45-56]
    B-1 Cost/Weight Trade Methodology............[57-68]
    Design and Development Support for Critical Helicopter Applications in Ti-6Al-4V Alloy............[69-80]
    Flat Rolled Beta Titanium Alloys for Airframe Application............[81-89]
    Applications of the High Strength Alloy Ti-4Al-4Mo-2Sn-0............[91-103]
    Titanium! The Bridge to Composites............[105-117]
    Titanium Castings for Marine Propellers............[119-130]
    Titanium Tubing and Fittings for Deep Submergence Hydraulic Systems............[131-144]
    Some Technical Considerations on the Use of Titanium Condenser Tubing in Public Utility Power Generation Turbines............[145-156]
    Titanium Corrosion in Distillation Columns............[157-164]
    The Role of Titanium in Anodizing and Electroplating............[165-184]
    Recent Development in the Application of Titanium for Motorcars............[185-199]
    Discussion............[201]
    Critical Review............[205-231]
    Murso Process for Producing Rutile Substitute............[233-245]
    Reduction of Ilmenite and Ilmenite Ores............[247-259]
    Methods of Titanium Powders Production............[261-269]
    The Interaction of Titanium with Refractory Oxides............[271-284]
    Potential Extractive Processes for Titanium Scrap Reclamation............[285-297]
    Critical Review............[303-317]
    The Effect of the Rate of Filling Moulds on the Solidification of Titanium-Alloy Ingots............[319-330]
    Durarc？ Process for Melting and Casting Titanium............[331-341]
    Some New Results about Casting of Titanium in the Electron Beam Melting Furnace............[343-352]
    Study of Residual Stresses in Cast Titanium Alloys............[353-363]
    Titanium Powder Metallurgy By Decomposition Sintering of the Hydride............[365-379]
    Titanium P/M Preforms, Parts and Composites............[381-398]
    Hot Isostatic Pressing of Titanium 6Al-4V............[399-418]
    Lubrication of Titanium Alloys under Conditions of Bulk Plastic Deformation............[419-429]
    The Influence of Process Variables on the Pressure Requirements for the Extrusion of Titanium Alloy Rods............[431-439]
    Titanium Precision Forgings............[441-451]
    Manufacturing Method and Mechanical Properties of Large Annular Forgings of Two-Phase Titanium Alloy............[453-461]
    Influence of Hot Working on the Properties of the Ti 6Al 4V Alloy with Special Regard to Heavy Sections............[463-475]
    The Manufacturing of Aircraft-Quality Hydraulic Tubing with the Ti-3Al-8V-6Cr-4Mo-4Zr Alloy............[477-488]
    Procedures and Precautions in Machining Titanium Alloys............[489-504]
    Smelting of Primary Ingots and Their Remelting in Plasma-Arc Furnaces with Cooled Molds............[505-516]
    Critical Review............[521-540]
    Metallurgical and Technological Features of Titanium Alloy Welding When Using Fluxes............[541-551]
    Microstructure Control in Welds of the Ti-6Al-6V-2Sn Alloy............[553-571]
    Factors Affecting the Ductility and Microstructure of Ti-6Al-6V-2Sn Titanium Alloy Weldments............[573-584]
    Electron Beam Welding of Ti-6Al-6V-2Sn Plate............[585-599]
    Weld Optimisation and Fatigue Tests on Low Voltage Electron Beam Welded 2in (51mm) Thick Ti-6Al-4V Alloy............[601-614]
    Some Fatigue Properties of Welds in two Titanium Sheet Alloys............[615-623]
    Pressure Requirements for Diffusion Bonding Titanium............[625-648]
    Fatigue Behavior of Diffusion Bonded Ti-6Al-4V Having Very Small Defects............[649-664]
    Correlation of Diffusion Bonded Ti-6Al-4V Properties with Acoustic Emission, Pulse-Echo and Fractographic Data............[665-678]
    Failure Experience with and Failure Anticipation in Titanium Components............[679-692]
    Effects of Ti-6Al-4V Alloy Metallurgical Structures on Ultrasonic Response Characteristics............[693-705]
    The Effects of Stress on the Detection of Fatigue Cracks by Ultrasonic Technique............[707-715]
    Ultrasonic Inspection of Titanium Airframe Components............[717-731]
    Non-Destructive Inspection of Titanium Jet Engine Disks............[733-741]
    Measurement by X-Ray Diffraction of Macro-Stresses and Micro-Stresses in Titanium and a Titanium Alloy............[743-754]
    Nondestructive Detection of Hydrides and Alpha-Case in Titanium Alloys............[755-765]
    Discussion............[767]
    Critical Review............[773-800]
    Some Relationships between the Electronic and Mechanical Properties of Ti Alloys, Discussed from the Standpoint of Fundamental Alloy Theory............[801-814]
    Physics of Titanium Alloys-Ⅰ: Alloying and Microstructural Effects in the Super-conductivity of Ti-Mo............[815-830]
    Physics of Titanium Alloys-Ⅱ: Fermi Density-of-States Properties, and Phase Stability of Ti-Al and Ti-Mo............[831-842]
    Relationships between Microstructure, Superconductivity and Mechanical Properties of Ti-6Al-4V............[843-858]
    Influence of Pinning Forces of Titanium-Niobium Base Alloys on the Critical Current up to 10 Tesla............[859-870]
    Peculiarities of Changes in Elastic Properties of Titanium Martensite............[871-881]
    Internal Friction Studies in Titanium and Titanium Base Alpha and Beta Alloys............[883-903]
    Investigation of Lattice Defects, Electronic Structure, and Diffusion Mobility in Titanium............[905-914]
    Interaction of Oxygen and Hydrogen in Titanium............[915-922]
    Thermodynamics of α-Stabilized Ti-X-Y Systems............[923-933]
    The Titanium-Alumlnum-Gallium System............[935-949]
    The Investigation of Phase Equilibrium and Some Properties of Ti-Al-Zr-Mo-Fe Alloys............[951-957]
    Discussion............[959-966]
    Critical Review............[969-1005]
    The Stability of Dislocations in Hexagonal Crystals............[1009-1019]
    Tensile Stress-Strain Curves of Cold Worked Polycrystalline-Titanium............[1021-1032]
    The Effects of Grain Size Refinement on the Mechanical Properties of Unalloyed Titanium............[1033-1047]
    The Deformation of α-Phase Titanium............[1049-1069]
    Slip in Titanium-Aluminum Alloys Containing Small Ti3Al Precipitates............[1071-1083]
    The Low Temperature Deformation Behaviour of the Intermetallic Compound Ti3Sn............[1085-1095]
    Asymmetry of Slip in Beta Ti-V Single Crystals............[1097-1107]
    A Study of the Nature of the Ductile-Brittle Transition in Beta-Titanium Alloys............[1109-1118]
    Titanium Alloys' Behaviour Under Various Loading Conditions............[1119-1130]
    Thermally Activated Deformation of Ti-N Alloys............[1131-1142]
    Thermally Activated Deformation in Ti 1% Si and Ti 5%Zr 1%Si............[1143-1153]
    Superlasticity in Large Grained Beta Titanium Alloys............[1155-1167]
    Twinning and Texture Transitions in Titanium Solid-Solution Alloys............[1169-1185]
    Cold-Rolling Texture Development in Titanium and Titanium-Aluminum Alloys............[1187-1197]
    Preferred Orientation in Titanium Alloy Thin Foils............[1199-1214]
    Discussion............[1215-1216]
    Fatigue Mechanisms in Titanium............[1219-1230]
    The Stress-Response of Cyclically-Deformed Alpla-Titanium............[1231-1243]
    Some Observations on Fatigue Crack Growth in Alpha-Titanium............[1245-1256]
    High Cycle Fatigue Properties of Titanium in Aircraft Application............[1257-1270]
    The Effect of Testing Direction on the Fatigue and Tensile Properties of a Ti-6Al-4V Bar............[1271-1281]
    The Effect of Section Size on the Fatigue Properties of Ti-6Al-4V Bars............[1283-1296]
    The Effect of Rolling Texture on the Fracture Mechanics Properties of Ti-6Al-2Sn-4Zr-6Mo Alloy............[1297-1320]
    Effect of Texture on the Charpy Impact Energy of Some Titanium Alloy Plate............[1321-1339]
    Evaluation of Anisotropy in Titanium Sheet by Knoop Hardness Measurements............[1341-1348]
    The Texture Hardening of Titanium and Its Alloy Sheets............[1349-1363]
    The Relationship between Crack Propagation Characteristics and Fracture Toughness in α+β Titanium Alloys............[1365-1376]
    The Fracture Toughness of 3 Ti Alloys............[1377-1391]
    A Characterization of the Fracture Resistance of Thick-Section Titanium Alloys............[1393-1409]
    Plane Stress Fracture Resistance of High Strength Titanium Alloy Sheet............[1411-1428]
    Discussion............[1427-1432]
    Critical Review............[1433-1494]
    Decomposition of Beta-Solid Solution in Beta-Titanium Alloys on Ageing............[1495-1506]
    The Effect of Molybdenum and Oxygen on Phase Transformations in Titanium-Zirconium Alloys............[1507-1520]
    The Effect of Gas Impurities, Cold Deformation and Other Factors on the Nature and Kinetics of Beta-Phase Decomposition in High-Alloyed Titanium Alloys............[1521-1534]
    Reversion at the Ageing of Titanium Alloys............[1535-1543]
    Some Fundamental Studies on the Phase Transformation from Beta Phase to Alpha Phase in Titanium A1loys............[1545-1556]
    Stability of Omega-Phase in a Ti-Zr-O System............[1557-1568]
    The Structure and Properties of Quenched Titanium Binary Alloys............[1569-1583]
    Zonal Dislocations for Twinning and Martensite Formation in Titanium ............[1585-1596]
    Substructure of Titanium-Zirconium Martensites............[1597-1608]
    Isothermal Transformations of Ti 6%Al 6%V 2%Sn Alloy after Preheating in the (α~β) Range............[1609-1619]
    Alloy Partitioning in Beta III and Effect on Aging Characteristics............[1621-1633]
    On the Quenched Structure and Aging Process of Ti-8~15.8wt%Al Alloy............[1635-1647]
    Grain Growth Kinetics in Ti-N Alloys............[1649-1660]
    Discussion............[1661.0]
    Critical Review............[1665-1693]
    Digital Computer Analysis of α-β Titanium Alloy Microstructure............[1695-1707]
    Yield Strength, Microstructure and Fracture Toughness............[1709-1718]
    The Effects of Microstructure and Composition on the Fracture Toughness of Titanium Alloys............[1719-1730]
    The Effect of Microstructure on the Control of Mechanical Properties in Alpha-Beta Titanium Alloys............[1731-1743]
    Dislocation Network Formation During Hydrostatic Extrusion............[1745-1753]
    The Influence of Controlled Processing on the Yield Strength and Toughness Properties of Titanium Alloy Extrusions............[1755-1767]
    The Effects of Extrusion Process Variables on the Structure and Properties of Titanium Alloys............[1769-1784]
    Influence of Forging Conditions on the Fatigue Behaviour of Ti-6Al-4V............[1785-1799]
    The Influence of Thermomechanical Processing on the Fatigue Behavior of Extruded Beta III Titanium ............[1801-1812]
    Microstructures and Mechanical Properties of Thermp-Mechanically Treated High-Strength Beta-Titanium Alloys............[1813-1827]
    Thermomechanical Treatment of a β Titanium Alloy............[1829-1840]
    Effect of the Thermomechanical Treatment on the Corrosion Resistance of Titanium Alloys............[1841-1852]
    The Age Hardening Characteristics and Mechanical Properties in a Titanium Alloy Ti-2Cu-1Zr............[1853-1867]
    Effects of the Dislocation Nucleation Around Rare-Earth Oxides in the Deformation of Titanium-Rare Earth Alloys............[1869-1879]
    Discussion............[1881-1883]
    Critical Review............[1887-1891]
    Dendrite Morphology and Microsegregation in Titanium Base Alloys............[1893-1914]
    Fundamentals of Cast Titanium Alloys Formulation............[1915-1928]
    Development of Cold Readable Titanium Alloys for the "Concorde" Supersonic Jet............[1929-1943]
    The Characteristics of Ti-Mo Beta Titanium Alloy............[1945-1956]
    Properties of Two Beta Titanium Alloys after Aging at Several Different Temperatures............[1957-1968]
    Metallurgical Characteristics and Mechanical Properties of Beta III, a Heat-Treatable Beta Titanium Alloy............[1969-1980]
    Development of a Deep-Hardenable Alloy for Intermediate-Temperature Applications............[1981-1991]
    Deep Hardenable Titanium Alloys for large Airframe Elements............[1993-2008]
    The Effect of Heat Treatment on the Mechanical Properties of the Alloy Ti-8Al-1Mo-1V............[2009-2023]
    Fracture Toughness of Transage 129 Alloy, Ti-2Al-11V-2Sn-11Zr............[2025-2039]
    New Features in the Heat Treatment of Ti-6Al-6V-2Sn-Cu-Fe Titanium Alloy ............[2041-2052]
    Heat Treatment Study of Beta Extruded Titanium Alloy Ti-6Al-6V-2Sn............[2053-2067]
    The Effect of Microstructure on the Low Cycle Fatigue Behavior of Ti-6Al-4V............[2069-2079]
    Improvements in the Fatigue Strength of Ti-6Al-4V Forgings............[2081-2095]
    The Effect of α+β Working on the Fatigue and Tensile Properties of Ti-6Al-4V Bars............[2097-2108]
    The Mechanical Properties of Case-Hardened Titanium Alloys............[2109-2120]
    Discussion............[2121.0]
    Critical Review............[2127-2140]
    Improvement in High-Temperature Tensile and Creep Properties of Titanium Alloys............[2141-2150]
    Properties and Structure of Binary and Ternary α-Titanium-Base Alloys............[2151-2165]
    The Mechanisms by which Certain Solute Elements Improve the Creep Strength of Alpha Titanium............[2167-2178]
    Synthesis of a High Temperature Near Alpha Titanium Alloy............[2179-2194]
    Titanium for High Temperature Applications............[2195-2205]
    Ductility of Ti-Al-Ga Alloys............[2207-2218]
    A New Titanium Alloy for Elevated Temperature Application............[2219-2225]
    Heat-Treatment and Mechanical Properties of Ti-6Al-2Co Alloy............[2227-2241]
    Computerized Parametric Analyses of Titanium Alloy Creep-Rupture Data............[2243-2254]
    Creep of β-Titanium Alloys............[2255-2267]
    Dynamic Creep of Titanium Alloy with 1.5 w/o Mn and 3% A1 in High-Velocity Air Streams............[2269-2278]
    Discussion............[2279-2280]
    Critical Review............[2283.0]
    Compatible Alloys for Titanium Matrix Composites............[2285-2297]
    Interfacial Reactions in Potential Titanium Matrix Composites............[2299-2312]
    Technological Parameters of Explosion-Bonded Titanium Cladding on Steel............[2313-2331]
    The Deformation and Fracture of Borsic？ Reinforced Titanium Matrix Composites............[2333-2345]
    Development of Boron Carbide-Titanium Laminar Composites............[2347-2357]
    Discussion............[2359-2360]
    Critical Review............[2363-2372]
    Features of the Corrosion Behavior of Titanium Alloys in Aggressive Media of Different Processes............[2373-2381]
    Pitting Corrosion of Titanium in High Temperature Halide Solutions............[2383-2393]
    The Role of Multi-Valent Metal Ions in Suppressing Crevice Corrosion of Titanium............[2395-2403]
    Anodic Oxidation of Titanium in Aqueous Solutions............[2405-2418]
    Anodic Protection of Titanium Plant............[2419-2429]
    The Effect of Ni on the Electrochemical Behavior of Ti-Ni Alloys............[2431-2445]
    Corrosion of Titanium Alloys in Physiological Solutions............[2447-2457]
    The Corrosion Behavior of Titanium Alloys in Chloride Solutions: Materials for Surgical Implants............[2459-2474]
    Fretting Resistant Coatings for Titanium Alloys............[2475-2486]
    Wear- and Erosion-Resistant Coating for Titanium Alloys............[2487-2499]
    New Surface Treatments for Titanium............[2501-2516]
    Metallurgy of Nickel-Base Coatings on Titanium Alloys............[2517-2525]
    Joining Nickel to Titanium............[2527-2534]
    Parameters of Oxygen Diffusion in Alpha- and Beta- Forms of Titanium ............[2535-2544]
    Structural and Kinetic Investigations into Oxidizability of Titanium and of Its Alloys, and Their Protection Against High-Temperature Gas Corrosion............[2545-2554]
    On the Scaling of Commercial Titanium Alloys............[2555-2571]
    Discussion............[2573-2574]
    Critical Review............[2577-2609]
    The Possible Relationship Between Lewis Acid Sites on Titanium Oxide Surfaces and the Penetration of the Oxide Film by Chloride Ion............[2611-2616]
    Surface Contamination and Stress Corrosion Cracking of Weldments in 5% A1, 2.5% Sn Type Titanium Alloys............[2617-2625]
    Hot-Salt Stress-Corrosion o￡ Titanium Alloys as Related to Turbine Engine Operation............[2627-2638]
    The Effects of Alloy Composition on the Salt-Water Stress-Corrosion Susceptibility of Titanium-Aluminum-Base Alloys............[2639-2654]
    The Effect of Solution pH on the Saline Water Corrosion of Titanium Alloys............[2655-2663]
    The Stress Corrosion Cracking of Titanium in a Mixture of Methyl Alcohol and Hydrochloric Acid............[2665-2677]
    The Effect of Gas Impurities on the Mechanism and Kinetics of Delayed Failure of Titanium Alloys............[2679-2692]
    A Study of Dislocation: Hydrogen Interaction in Titanium-Aluminum Alloys via Internal Friction Measurements............[2693-2702]
    Reversible Hydrogen Embrittlement of Titanium Alloys............[2703-2717]
    Discussion............[2719.0]
    Titanium Science and Technology
    当前位置：首页 > 会议文集
    Insert title here

    登录

    登录
    输入用户名登录
    企业注册       个人注册       登录        联系我们       收藏本站       设为首页
    Insert title here